Fly safer, see farther
with LoPresti Boom Beams!

Our Boom Beam HID lighting systems improve lighting in most cases by more than 500% and consists of a power supply, shielded high voltage wire harness, plug in HID lamp, mounting hardware, and your choice of lens reflector assemblies.

For our round reflectors we have Landing, Taxi and Intermediate beam widths. The Landing beam has an exceedingly long range and is a 10 degree circle, (stock sealed beams are generally 10 wide by 5 high), the Taxi beam will flood the immediate area and is 55 degrees wide by 25 high, and the Intermediate also has a very long range but has the advantage of a much larger “foot print” on the runway, (our recommended light for single HID systems) and is a 17 degree circle. We also have rectangular reflectors for wing tip applications.

These systems are available in 14 and 28 volt versions.

To make installation as fast and as simple as possible we furnish “ClickBond” fasteners that glue in place and hold our power supply and wire harness. Virtually the entire installation can be accomplished by gluing, crimping and tie wrapping.

Our Boom Beam system is FAA/PMA’d and STC’d for Piper PA-32's, PA-32R's with a LoPresti Cowling and can be field approved on virtually every other aircraft.

To order please call us at 877-565-1731, and have your voltage, registration number, beam pattern, shipping address and credit card ready.

• Tested to DO-160D
• FAA/PMA Approved Parts

• Five-Year / 5000 Hour Warranty

• 7X the candlepower of standard lights

• No filament to break

Available in 3 widths:
Taxi - 54° width
Intermediate - 17° width  - Recommended
Landing - 9° width

Click for kit listing

Can be field installed in many aircraft.  
Great for your experimental kit aircraft in 14 and 28 Volt
MPG video of Boom Beam start up in a Cherokee 235

See AOPA Story   See Aviation Consumer

No Filament to break!

A New High Tech, HID (High Intensity Discharge), Xenon landing light system
The whitest, brightest idea in aircraft lighting in 25 years. And LoPresti Speed Merchants is the first to offer it for aircraft use.

This exciting new technology uses mercury and xenon gases to create and maintain the light source.

These gasses are ignited by applying power to two electrodes within a glass tube. The Boom Beam provides a light whose color is very close to actual daylight. This means that not only is the light MUCH brighter than the standard light, but is also much whiter, yielding colors that are truer, giving you a better night view.

Vibration and shock are the primary killers of a normal light bulb.  The filament in a normal bulb is very fragile and any kind of vibration or shock can cause a failure.  LoPresti Speed Merchants Boom Beam has been extensively proven in a very rough environment, Off Road Racing.  The Boom Beam can take a pounding and come out shining.  The Boom Beam is so rugged that we warranty the bulb for 5 years. The Boom Beam makes a near ideal aircraft landing light.

Call 877-565-1731 to order!

• Over 500,000 candle power. 
• 5 times brighter than a 100 watt sealed beam light.
• Now Available in Landing, Intermediate and Taxi versions!
• New Metal Halide - Xenon - High Intensity Discharge Light System.
• Very white light (like the new Lexus, Porsche, Mercury Headlights).
  The light is close to daylight color.
• Warranty includes bulb burnout
• Can be left on continuously, 5,000 Hour Bulb Life
• Reduces load on alternator, system uses less than 3 amps at 14 volts, 1.4 at 28 volts.
• No filament to break.  The filament is the weak link in all standard and Halogen lighting.